Skip to content 
Interior Paints
Discover the future of interior wall paints with Stellar Interior Paints – for the highest standards of quality and performance. Our innovative formulation
guarantees not only outstanding results, but also cost-effectiveness, environmental friendliness, and time savings. With Stellar Interior Paints, you get
not only a product of unparalleled quality, but also a solution that exceeds your expectations. Thanks to our advanced formulation,
you can effortlessly achieve a flawless finish that will brighten up any room.
Our interior paints are not only easy to apply, but also offer long-lasting durability and resistance to wear and tear. This means less rework and more time for what matters to you. We also place great importance on environmental friendliness. Our interior paints are formulated to be environmentally friendly and help protect your surroundings while promoting a healthy indoor climate.
Discover the unbeatable combination of quality, cost-effectiveness, and environmental friendliness with Stellar Interior Paints – for a room that not only
looks beautiful but also reflects your lifestyle. Stellar products guarantee the highest quality and customer satisfaction!
LATEXOL SPL
Premium semi-gloss latex paint for interiors. Wet abrasion resistance class 1, contrast resistance class 2 at 8m²/L. 15 liters
PAINTER'S WHITE 140
Efficient emulsion paint for interiors. Wet abrasion resistance class 3, contrast class 1 at 6m²/L. 15 liters
ECO-WHITE 120
DIAMOND 150
Premium ELF emulsion paint for interiors. Wet abrasion resistance class 1, contrasting. Class 1 at 8m²/L. 15 liters
DIAMOND EXTRA
Hochwertige spezial Universal-Dispersionsfarbe für Innen. Nassabriebsklasse 2, Kontrastv. Klasse 1 bei 8m2+/L. 15Liter
STROKE PLASTER SI
Silikat Strreichputz für Innen. 25 KG
SILCATEX INT
Rationelle Silikatfarbe für Innen. Nassabriebsklasse 3, Kontrastv. Klasse 2 bei 7m2+/L. 15Liter
SILANEX SI
Premium SOL-Silikatfarbe für Innen. Nassabriebsklasse 2, Kontrastv. Klasse 1 bei 7m2+/L. 15Liter
LATEXOL SPL
Premium satin gloss latex paint for interior use
Properties:
• Solvent- and plasticizer-free
• Low emissions and odor
• Highly durable
• White and satin finish
• Free from fogging agents
• Excellent coverage
• Highly permeable
• Water-dilutable and low-stress
• Easy to apply
• Class 1 wet abrasion resistance
• Class 2 contrast ratio at 8 m²/l
• Particularly suitable for hard-wearing and easy-to-clean surfaces.
Areas of application:
Discover the future of interior wall paints with Stellar interior paints – for the highest standards of quality and performance. Our innovative formula not only guarantees outstanding results, but also cost-effectiveness, environmental friendliness and time savings. With Stellar interior paints, you get not only a product of unparalleled quality, but also a solution that exceeds your expectations. Thanks to our advanced formulation, you can effortlessly achieve a flawless finish that makes every room shine.
Our interior paints are not only easy to apply, but also offer long-lasting durability and resistance to wear and tear. This means less reworking and more time for what is important to you. In addition, we attach great importance to environmental friendliness. Our interior paints are formulated to be environmentally friendly and help protect your surroundings while promoting a healthy indoor climate.
Discover the unbeatable combination of quality, economy and environmental friendliness with Stellar interior paints – for a room that not only looks beautiful, but also reflects your lifestyle. Stellar products guarantee the highest quality and customer satisfaction!
MALERWEISS 140
Properties:
• Free of solvents and plasticisers
• Low odour
• White and matt finish
• Good filling and covering power
• Highly diffusible
• Easy to apply
• Wet abrasion resistance class 3
• Contrast ratio class 1 at 6 m²/l
Areas of application:
For interior use, ideal for efficient wall and ceiling painting on stable substrates, e.g. interior plaster (standard plaster MG PII–PIV, depending on compressive strength), sand-lime brickwork, concrete, plasterboard, woodchip, lime and interior plasters, and existing emulsion paints.
ECO-WEISS 120
Properties:
• Solvent- and plasticiser-free
• Low emissions and odour
• White and matt finish
• Free from fogging-active substances
• Good filling and covering capacity
• Highly diffusible
• Water-dilutable and low-tension
• Easy to apply
• Wet abrasion resistance class 3
• Contrast ratio class 2 at 6 m²/l
Areas of application:
For interior use, ideal for efficient wall and ceiling painting on stable substrates such as interior plaster (standard plaster MG PII–PIV, depending on compressive strength), sand-lime brick, concrete, plasterboard, woodchip and lime and interior plasters.
DIAMOND 150
Properties:
• Solvent- and plasticiser-free
• Low odour
• White and matt finish
• Harmless to indoor climate
• Diffusion-open
• Excellent flow
• Wet abrasion resistance class 1
• Contrast ratio class 1 at 8 m²/l
• Ideal for use in areas where indoor air hygiene is important.
Areas of application:
For interior use, especially for large-area, high-quality wall and ceiling coatings on stable substrates, such as interior plaster (standard plaster MG PII–PIV a, b, depending on compressive strength), sand-lime brick, concrete, plasterboard, glass fabric and crack-bridging coating fleece. Particularly recommended for surfaces with lateral or streaking light incidence.
DIAMOND EXTRA
High-quality universal emulsion paint for interior use
Properties:
• Free of solvents and plasticisers
• Low emissions and odour
• Very white and matt finish
• Free of fogging-active substances
• Excellent whiteness
• Good filling and covering capacity
• High diffusion capacity
• Water-dilutable and low tension
• Easy to apply
• Wet abrasion resistance class 2
• Contrast ratio class 1 at 8 m²/l
Areas of application:
For interior use, ideal for large-area, high-quality wall and ceiling coatings on stable or textured substrates, such as interior plaster (standard plaster MG PII–PIV, depending on compressive strength), sand-lime brick, concrete, plasterboard, woodchip wallpaper, lime plaster and interior plaster. Thanks to its high whiteness and excellent covering power, the material is particularly suitable for renovation coatings, where in many cases only one coat is required.
STROKE PLASTER SI
Properties:
• Solvent- and plasticiser-free
• Low emissions and odour
• White and matt finish
• Texture-enhancing
• Good filling and covering properties
• Highly diffusible
• Water-dilutable and low-tension
• Excellent workability
Areas of application:
For interior use, suitable for wall and ceiling coatings and as a plaster primer on stable, mineral-based substrates that are suitable for silicification, such as interior plaster (standard plaster MG PI–PV, depending on compressive strength), concrete, sand-lime brick, intact silicate and emulsion coatings, and plasterboard.
SILICATEX INT
Properties:
• Free from solvents and plasticisers
• Low emissions and low odour
• White and matt finish
• Texture-enhancing
• Good filling and covering properties
• Highly diffusible
• Water-dilutable and low-tension
• Excellent workability
Areas of application:
For interior use, suitable for painting walls and ceilings on stable, silicifiable mineral substrates, such as
interior plaster (standard plaster MG PI a, c, PII, PIII, depending on compressive strength), concrete, sand-lime brick, intact silicate paint coatings,
emulsion paints, plasterboard or woodchip wallpaper.
SILANEX SI
Properties:
• Free from solvents and plasticisers
• Low odour
• Dull matt finish
• High covering power
• High whiteness
• Good filling and covering power
• Highly diffusible
• Easy to apply
• Wet abrasion resistance class 2
• Contrast ratio class 1 at 7 m²/l
• Free from preservatives and fogging-active substances, therefore ideal for allergy sufferers.
Areas of application:
For interior use, suitable for painting walls and ceilings on stable, silicifiable mineral substrates, such as interior plaster (normal plaster MG PI a, c, PII–PIV, depending on compressive strength), sand-lime brick or concrete. Thanks to the specially formulated combination of silica sol and water glass, the product can also be used on matt emulsion paints, plasterboard or woodchip wallpaper.
Click on the PDF icon to download the technical data sheet.
